Murata: miniature 2 Watt DC-DC converters

Murata announced the MTC2 series of 2 Watt single output, regulated and isolated DC/DC converters from Murata Power Solutions. Available with either a 12 or 24 VDC 2:1 input voltage range and output voltages of 3.3, 5, or 12 VDC, the surface mount MTC2 has a 3 kVAC input to output isolation.

Measuring just 0.59 x 0.56 x 0.44″ (14.99 x 14.22 x 11.23mm), the converter complies with both the UL/EN 60950 reinforced insulation safety standard for use in commercial equipment and the ANSI/AAMI ES60601-1 medical safety specification with 2 x MOOP (Means of Operator Protection).

The output is regulated to ±0.5% of the nominal output voltage and an output voltage trim function permits adjustment of the output by ±10% to suit the needs of special applications. No additional regulation components are required and, with the 2:1 input range, the MTC2 is capable of accommodating applications where there may be wide deviations of the input voltage.

A remote on/off pin is available to aid sequencing power start-up in a design or to enable application power saving features. A continuous short circuit protection function ensures that both the load and the device are protected from short circuit conditions.

Capable of operating at full output from -40 to +85 °C, the MTC2 can operate up to +105 °C with derating. No electrolytic capacitors are used in the design of the MTC2.

pb

Contenuti correlati

• 
  Murata enables better Wi-Fi 6E and Wi-Fi 7 antenna design

  Murata has announced its new Parasitic Element Coupling Device. This solution improves antenna efficiency by magnetically coupling the parasitic element with the antenna and is the world’s first solution designed for Wi-Fi 6E and Wi-Fi 7 products....
• 
  Murata Power Solutions choose SiC SBDs from ROHM for data center PSUs

  ROHM  has announced that Murata Power Solutions is using its high-performance silicon carbide (SiC) Schottky Barrier Diodes (SBD) to increase performance and reduce the size of Power Supply Units (PSUs) for data center applications. ROHM’s SiC SBDs,...
• 
  Convertitori c.c./c.c. per gate driver: criteri di scelta

  Dagli alimentatori agli azionamenti per motore, dalle stazioni di ricarica a una miriade di altre applicazioni, i semiconduttori di potenza a commutazione, come i MOSFET realizzati in silicio (Si), carburo di silicio (SiC) e nitruro di gallio...
• 
  TDK-Lambda : rugged ultra-wide input 30-75W DC-DC quarter-brick converters

  TDK Corporation announces the introduction of the 30-75W TDK-Lambda brand PYQ series of DC-DC converters. The PYQ50 with 30-50W output power features a 12:1 ultra-wide input range of 14 to 160Vdc, and the PYQ75 with 75W an...
• 
  RECOM RPX series DC/DC converters at Rutronik

  The RECOM RPX DC/DC converters in QFN housings are now also available, at Rutronik, as ‘-Q‘ variants which meet the strict requirements of the automotive industry according to AEC-Q100 Grade 1. Optionally, the can also be equipped...
• 
  TDK-Lambda: new 20W DC-DC converters

  TDK Corporation announces the introduction of the 20W TDK-Lambda brand PYD20 series of DC-DC converters. Featuring an 18:1 ultra-wide input range of 8.5 to 160Vdc, these board mount products are packaged in the industry-standard 2” x 1”....
• 
  TDK-Lambda: 200W half-brick DC-DC converters

  TDK Corporation introduced the 200W TDK-Lambdabrand PYH200 series of DC-DC converters. Featuring a 12:1 ultra-wide input range of 14 to 160Vdc, these board mount products are packaged in the industry-standard half-brick format measuring. The housing is silicon...
• 
  TDK-Lambda: 40W and 60W DC-DC converters

  TDK Corporation announces the introduction of the TDK-Lambda brand PXD40 and PXD60 series of 40 and 60W DC-DC converters. Packaged in the industry-standard 2”x1” footprint, the units can operate over a wide 4:1 input range, accepting either...
• 
  I nuovi alimentatori da 650W di Murata per applicazioni medicali e industriali

  Murata Power Solutions ha realizzato una nuova linea di alimentatori AC-DC da 650 W di tipo open-frame caratterizzati da un ampio range di regolazione della tensione di uscita, dalla presenza di power rails (terminali di potenza) ausiliari...
• 
  RECOM: low cost 2W DC/DC converters in open-frame SMD

  The R2SX series of compact 2W DC/DC converters are suited for bus isolation and a wide range of industrial automation control equipment. The RECOM‘s R2SX is an open-frame 2W SMD isolated DC/DC converter with either 3kVDC/1 minute...