500W low airflow medical configurable power supply series enhanced with additional features

The 500W rated configurable TDK-Lambda  XMS500A series of AC-DC power supplies is mechanically designed for effective cooling with a low 1m/s airflow, reducing acoustic noise. Additional features over the preceding XMS500 models include an ATX power good signal, full power at 85Vac input, extended 20ms hold-up time and compliance with EN60601-1-2 immunity.

The XMS500A is certified to both medical and industrial safety standards and meets EN55011-B and EN55032-B radiated and conducted emissions in protection Class I or Class II (no earth ground wire) applications. Target applications include home healthcare, hospital equipment, imaging and clinical diagnostic systems in addition to industrial, test and measurement and communications equipment.

The configurability of the XMS500A allows engineers to select from a wide range of options to optimise system design and lower cost without requiring the development of a modified standard. These options include 5V and 12V standby voltages, a fan supply voltage, case options (including a built-in fan), remote on/off, reduced leakage / touch current, AC fail, and single or dual input fusing.

Standard output voltages available are 12V, 24V, 36V and 48V. Additional voltages and options are also offered.

Operating from 85 to 264Vac and withstanding 300Vac surges for five seconds, the series can deliver full power in ambient temperatures up to 50°C with linear derating to 50% load at 70°C.

Contenuti correlati

• 
  TDK-Lambda: new Class I & II industrial 10 to 50W power supplies

  The TDK-Lambda ZWS-C series of 10, 15, 30 and 50W rated industrial AC-DC power supplies meet EN55011/EN55032-B conducted and radiated EMI in either a Class I or Class II (double insulated) construction, without the need for external...
• 
  TDK-Lambda: new PSINK option for the GENESYS+ power supplies

  TDK Corporation announces the introduction of a Power Sink (PSINK) option to the 1.7kW and 3.4kW models of the TDK-Lambda GENESYS+ series of high-power density programmable DC power supplies. Capable of absorbing and dissipating up to 300W...
• 
  New extremely low acoustic noise modular power supply from TDK-Lambda

  TDK Corporation announces the introduction of the TDK-Lambda brand MU4 series of AC-DC modular power supplies. The product is suitable for test and medical applications where audible disturbances need to be kept to a minimum. The modular...
• 
  Compact 250W medical and industrial power supplies from TDK-Lambda

  TDK Corporation announces the introduction of the 250W rated TDK-Lambda brand 2”x4” footprint CUS250M series of AC-DC power supplies. The series is certified to both IEC 60601-1 and IEC 62368-1 standards for both Class I and Class...
• 
  TDK-Lambda: configurable programmable power supply systems up to 60kW

  TDK Corporation announces the introduction of 20U high, 19-inch rack cabinet high power solutions to the TDK-Lambda GENESYS+ series of programmable DC power supplies. The configurable GSPS series can provide 30kW, 45kW or 60kW of output power...
• 
  TDK-Lambda power supplies with very fast output dynamics for automotive test

  TDK Corporation announces the introduction of a “Fast-Speed” option to the TDK-Lambda GENESYS+ series of programmable DC power supplies. Designed specifically for automotive test simulation, the –F suffix models provide very fast transient responses up to 35...
• 
  500W medical and industrial power supplies from TDK-Lambda

  TDK Corporation announces the introduction of the 500W rated TDK-Lambda brand CUS500M1 series of AC-DC power supplies. The series is certified to the medical IEC60601-1 and audio / visual / ITE (Information Technology Equipment) IEC62368-1 standards for...
• 
  COSEL announces 330% peak power 1kW open-frame power supplies

  COSEL announced the introduction of 1,000W free-air convection cooling power supplies, the AEA1000F series. With demanding applications in mind, the AEA1000F is able to deliver 330% peak power for a period of up to 3,000 milliseconds. Designed...
• 
  TDK-Lambda: compact 120W and 240W three-phase input DIN rail power supplies

  TDK Corporation announces the addition of three-phase AC input models to the TDK-Lambda DRB series of economically priced DIN rail mount power supplies. Rated for continuous operation at 120W and 240W with 12V, 24V and 48V outputs,...
• 
  EA Elektro-Automatik offers DC power supplies and regenerative DC loads for fuel cell stack testing

  To ensure the design and manufacturing of quality fuel cells, EA Elektro-Automatik offers its EA-PSB 10000 2-quadrant power supplies and EA-ELR 10000 series electronic loads. Both the EA-PSB power supplies and the EA-ELR loads sink up to...