TDK Lambda: EMC filter modules
TDK Lambda ha announced the introduction of the iDQ series of 10A, 48Vdc nominal EMC filter modules. With high on-board capacitance, the filters are ideal for use with DC-DC converters, minimising the need for external components and thus saving on printed circuit board area.
Rated for a maximum voltage of 75Vdc, the iDQ has a differential mode attenuation of 63dB at 300 kHz measured with a 50Ω source and load impedance. The compact filter measures just 50mm in length, 15mm in width, with a height of 10.8mm. The iDQ will operate without forced air cooling in ambient temperatures of -40 to +85ºC.
Utilising TDK component technology, system level compliance to FCC and CISPR is made easier. A pin is provided for the addition of extra capacitance to further enhance common mode perfor-mance. The iDQ has 1500Vdc isolation from ground; enabling operation in systems where the ground is connected to either the positive or negative input.10
Contenuti correlati
-
TDK-Lambda: new Class I & II industrial 10 to 50W power supplies
The TDK-Lambda ZWS-C series of 10, 15, 30 and 50W rated industrial AC-DC power supplies meet EN55011/EN55032-B conducted and radiated EMI in either a Class I or Class II (double insulated) construction, without the need for external...
-
TDK-Lambda: new PSINK option for the GENESYS+ power supplies
TDK Corporation announces the introduction of a Power Sink (PSINK) option to the 1.7kW and 3.4kW models of the TDK-Lambda GENESYS+ series of high-power density programmable DC power supplies. Capable of absorbing and dissipating up to 300W...
-
New full-brick DC-DC converters from TDK-Lambda
TDK-Lambda PH1200A280 are full-brick DC-DC converters for use with HVDC (high voltage direct current) input voltages from 200 to 425Vdc. This further extends the PH-A280 series – with power levels of 50W, 75W, 100W, 150W, 300W, 600W...
-
TDK-Lambda: external power supplies for medical and industrial applications
TDK Corporation announces the addition of the TDK-Lambda brand DTM70 and DTM160 series to the DTM family of compact medical and industrial AC-DC power adapters that are available in various power classes from 36W to 300W. Both...
-
TDK-Lambda: six new output configurations for the 7.5kW GENESYS+ series
TDK Corporation announces the introduction of six new models to the 7.5kW TDK-Lambda GENESYS+ series of high power density programmable DC power supplies. This expansion now provides incremental and seamless choices in output voltage and current ranging...
-
New extremely low acoustic noise modular power supply from TDK-Lambda
TDK Corporation announces the introduction of the TDK-Lambda brand MU4 series of AC-DC modular power supplies. The product is suitable for test and medical applications where audible disturbances need to be kept to a minimum. The modular...
-
Half brick converters for railway applications from TDK-Lambda
TDK Corporation announces the introduction of the TDK-Lambda CN-110B series of half-brick DC-DC converters for railway power systems. An input range of 43 to 160Vdc enables their use with 72V or 110V nominal DC inputs. The baseplate...
-
TDK-Lambda : rugged ultra-wide input 30-75W DC-DC quarter-brick converters
TDK Corporation announces the introduction of the 30-75W TDK-Lambda brand PYQ series of DC-DC converters. The PYQ50 with 30-50W output power features a 12:1 ultra-wide input range of 14 to 160Vdc, and the PYQ75 with 75W an...
-
TDK-Lambda: new 20W DC-DC converters
TDK Corporation announces the introduction of the 20W TDK-Lambda brand PYD20 series of DC-DC converters. Featuring an 18:1 ultra-wide input range of 8.5 to 160Vdc, these board mount products are packaged in the industry-standard 2” x 1”....
-
TDK-Lambda: 200W half-brick DC-DC converters
TDK Corporation introduced the 200W TDK-Lambdabrand PYH200 series of DC-DC converters. Featuring a 12:1 ultra-wide input range of 14 to 160Vdc, these board mount products are packaged in the industry-standard half-brick format measuring. The housing is silicon...












