TDK-Lambda power supplies with very fast output dynamics for automotive test
TDK Corporation announces the introduction of a “Fast-Speed” option to the TDK-Lambda GENESYS+ series of programmable DC power supplies. Designed specifically for automotive test simulation, the –F suffix models provide very fast transient responses up to 35 times faster than the standard models. Rise and fall times of less than 1ms and 2ms respectively can now be achieved, providing reduced test times for an increased manufacturing test capacity.
Automotive applications that would benefit from using the Fast-Speed option models include Hardware in the Loop (HIL), engine and powertrain control, Body Control Modules (BCM), interior electronics and diagnostic testing.
The option is currently available on the 1U high, 19” rack mount 1.7kW, 3.4kW and 5kW models with outputs of 20, 30 or 40V. Input voltages range from 85 to 265Vac single phase on the 1.7kW rated units, 170 to 265Vac single phase, 170 to 265Vac or 342 to 528Vac three phase on the 3.4kW units and 170 to 265Vac or 342 to 528Vac three phase on the 5kW units.
All GENESYS+ models can transition seamlessly between constant voltage and constant current modes or operate in constant power mode. Higher power systems can be created using multiple power supplies connected in parallel. TDK-Lambda’s patented advanced parallel system provides dynamic load response and ripple and noise characteristics comparable with that of a single power supply.
Programming is standardised across the entire GENESYS+ series using front panel controls, remotely via LAN (LXI 1.5), USB 2.0 and RS232/485 communications or the isolated analogue control and monitoring interface (0-5V, 0-10V) which are provided as standard. Optional interfaces include a choice of GPIB (IEEE488.2), EtherCAT, Modbus-TCP and IS420 (4 to 20mA isolated current programming loop).
Contenuti correlati
-
TDK-Lambda: new Class I & II industrial 10 to 50W power supplies
The TDK-Lambda ZWS-C series of 10, 15, 30 and 50W rated industrial AC-DC power supplies meet EN55011/EN55032-B conducted and radiated EMI in either a Class I or Class II (double insulated) construction, without the need for external...
-
TDK-Lambda: new PSINK option for the GENESYS+ power supplies
TDK Corporation announces the introduction of a Power Sink (PSINK) option to the 1.7kW and 3.4kW models of the TDK-Lambda GENESYS+ series of high-power density programmable DC power supplies. Capable of absorbing and dissipating up to 300W...
-
New extremely low acoustic noise modular power supply from TDK-Lambda
TDK Corporation announces the introduction of the TDK-Lambda brand MU4 series of AC-DC modular power supplies. The product is suitable for test and medical applications where audible disturbances need to be kept to a minimum. The modular...
-
Compact 250W medical and industrial power supplies from TDK-Lambda
TDK Corporation announces the introduction of the 250W rated TDK-Lambda brand 2”x4” footprint CUS250M series of AC-DC power supplies. The series is certified to both IEC 60601-1 and IEC 62368-1 standards for both Class I and Class...
-
TDK-Lambda: configurable programmable power supply systems up to 60kW
TDK Corporation announces the introduction of 20U high, 19-inch rack cabinet high power solutions to the TDK-Lambda GENESYS+ series of programmable DC power supplies. The configurable GSPS series can provide 30kW, 45kW or 60kW of output power...
-
500W medical and industrial power supplies from TDK-Lambda
TDK Corporation announces the introduction of the 500W rated TDK-Lambda brand CUS500M1 series of AC-DC power supplies. The series is certified to the medical IEC60601-1 and audio / visual / ITE (Information Technology Equipment) IEC62368-1 standards for...
-
COSEL announces 330% peak power 1kW open-frame power supplies
COSEL announced the introduction of 1,000W free-air convection cooling power supplies, the AEA1000F series. With demanding applications in mind, the AEA1000F is able to deliver 330% peak power for a period of up to 3,000 milliseconds. Designed...
-
TDK-Lambda: compact 120W and 240W three-phase input DIN rail power supplies
TDK Corporation announces the addition of three-phase AC input models to the TDK-Lambda DRB series of economically priced DIN rail mount power supplies. Rated for continuous operation at 120W and 240W with 12V, 24V and 48V outputs,...
-
EA Elektro-Automatik offers DC power supplies and regenerative DC loads for fuel cell stack testing
To ensure the design and manufacturing of quality fuel cells, EA Elektro-Automatik offers its EA-PSB 10000 2-quadrant power supplies and EA-ELR 10000 series electronic loads. Both the EA-PSB power supplies and the EA-ELR loads sink up to...
-
500W low airflow medical configurable power supply series enhanced with additional features
The 500W rated configurable TDK-Lambda XMS500A series of AC-DC power supplies is mechanically designed for effective cooling with a low 1m/s airflow, reducing acoustic noise. Additional features over the preceding XMS500 models include an ATX power good...