New converters in the i7C series

Posted 13 October 2020

TDK-Lambda announces the introduction of 12.5A 300W rated models to the i7C  series of non-isolated DC-DC converters. The output voltage of these step-up and step-down converters can be adjusted from 5 to 28V and they accept a wide range input voltage of 9 to 53V.

The i7C 12.5A series can be used to derive additional high power outputs from a 12V, 24V, 36V or 48V DC power supply.

These very compact products are suited for use in medical, communications, industrial, test and measurement, broadcast and portable battery powered equipment.

At zero load, the input current draw is typically just 5mA, which can be reduced to around 0.25mA when the remote on-off is used to put the converter into standby.

Three mechanical configurations are available, measuring 36.8mm wide and 34mm in length.

The thermal design of the i7C series allows for minimal output de-rating, even with low airflow conditions.

Standard features for the i7C series include a trim pin for output voltage adjustment, + remote sense, remote on-off (positive or negative logic), input under-voltage, over-current and over-temperature protection.

As an option, the full-featured models are equipped with a power good signal, output current monitoring and to minimise system noise, the switching frequency can be synchronised to another model or to an external clock.

All models have safety certification to the IEC/EN 62368-1 and 60950-1 standards.



Contenuti correlati

  • RECOM
    RECOM: range of ‘Ready to Use’ mobility application DC/DCs extended to 600W

    RECOM has added to its range of cost-effective DC/DC converters for the mobility market with a 600W-rated product featuring a choice of input ranges. The RMOD600-W anche the RMOD600-EW are in rugged metallic enclosures sealed to an...

  • New full-brick DC-DC converters from TDK-Lambda

    TDK-Lambda PH1200A280 are full-brick DC-DC converters for use with HVDC (high voltage direct current) input voltages from 200 to 425Vdc. This further extends the PH-A280 series – with power levels of 50W, 75W, 100W, 150W, 300W, 600W...

  • Half brick converters for railway applications from TDK-Lambda

    TDK Corporation announces the introduction of the TDK-Lambda CN-110B series of half-brick DC-DC converters for railway power systems. An input range of 43 to 160Vdc enables their use with 72V or 110V nominal DC inputs. The baseplate...

  • RECOM’s 500 W DC/DC converter RMD500 at Rutronik

    RECOM offers the RMD500 series, available at Rutronik, with 500 W DC/DC converters designed for the specific requirements of transportation and especially rail vehicles. Their 4:1 input voltage range can cover input voltages from 43 VDC to...

  • AOS: application-specific EZBuck regulator for Intel Rocket Lake platform

    Alpha and Omega Semiconductor (AOS) introduced a new family of application-specific EZBuck regulators. AOZ2263VQI-01 and AOZ2263VQI-02 converters include features specifically designed to meet the Intel Rocket Lake Platform’s specifications. The 2-bit VID pins allow the VCCIO_0 and...

  • New 750W DC-DC step-down converters in TDK-Lambda i7A series

    TDK Corporation announces the introduction of the 750W rated TDK-Lambda i7A series of non-isolated buck DC-DC converters, packaged in the industry-standard 1/16th brick footprint. The output voltage of these 24V nominal input step-down converters can be adjusted...

  • TDK-Lambda: new 300W buck-boost DC-DC converter

    TDK Corporation announces the introduction of 20A 300W rated models to the TDK Lambda brand i7C series of non-isolated DC-DC converters. The output voltage of these latest step-up and step-down converters is adjustable from 8 to 24V,...

  • Traco: DC/DC converters for applications in railway and harsh environments

    Traco’s THN 20WIR series is a family of ruggedized 20 Watt DC/DC converters for highest reliability in harsh environments, expanding our existing railway range in the 1” x 1” package up to 20 Watt. THN 20WIR has...

  • RECOM launches cost effective board-mount AC/DC converters

    RECOM announced two ranges of board-mount AC/DC converters, the RAC02E-K/277 and RAC03E-K/277, rated at 2W and 3W respectively. Inputs include nominals of 100VAC up to 277VAC for use in a wide variety of applications worldwide. Regulated outputs...

  • TDK-Lambda announces 500W DC-DC buck step-down converters

    TDK Corporation announces the introduction of the TDK-Lambda i7A series of 33A 500W rated non-isolated DC-DC converters, packaged with the industry-standard 1/16th brick pinout. The output voltage of these step-down converters can be adjusted from 3.3 to...

Scopri le novità scelte per te x