7 fellows & 7 thoughts about Moore’s Law – “Design techniques are helping to keep Moore’s Law alive longer”
Moore’s Law means that electronic products can constantly be produced more cheaply, faster and more economically. Down to 45 nm, this was due mainly to the technology that made it possible to reduce the size of transistors. Now things are becoming more difficult; but even if we are not able to achieve these gains through the further scaling of transistors as the result of technology alone, Moore’s Law is still not dead yet.
Thanks to ever-more ingenious design techniques, we will be able to make up for the difficulties inherent with scaled technology for as long as possible. Imagine, for example, that the default technology in the 7 nm node were no longer able to produce gains in energy: this would be partially compensated for with design techniques.
This means that innovations in design will become increasingly important for the further scaling of transistors. 15 years ago, I – as a system design specialist – had virtually no connection with technology. That situation has now changed dramatically. Designers and technologists are working increasingly close together to make possible the nodes of the future so that reliable products can be manufactured economically.
That is not only true for logic circuits. You can also use design techniques for memories to improve writability (endurance) by not always using the same cell. Sure, there’s plenty of work being done today in the area of design techniques, but that needs to increase even further. Moore’s Law may well slow down, but it certainly won’t stop.
The 5 nm technology node will still have a large market. These types of scaled technologies are particularly important for density and performance-driven applications, such as servers. Power consumption is not yet playing a major role in this area, although that is slowly changing. But when it comes to embedded systems such as sensors, energy consumption becomes an absolute priority.
That’s why design techniques are so essential. The 3 nm node will also be fully explored, probably without a standard MOSFET. In terms of transistors and circuits this means that new design techniques and models will have to be developed.
There will also have to be significant changes on an architectural level, too. Only on higher design levels will as little as possible be changed. And then we also need to take account of totally new design paradigms: neuromorphic and quantum computing, for example. These also provide an opportunity in subdomains, although no one yet knows whether they will be able to compete with the existing technologies in major markets.
We certainly shouldn’t be looking at the difficulties in scaled technology as a threat, but rather as an opportunity for new developments. Chip research and the chip industry still have a long way to go.
About the author
Francky Catthoor received the engineering degree and a Ph.D. in electrical engineering from the Katholieke Universiteit Leuven, Belgium in 1982 and 1987 respectively. Between 1987 and 2000, he has headed several research domains in the area of high-level and system synthesis techniques and architectural methodologies, including related application and deep submicron technology aspects, and smart photo-voltaic modules, all at imec, Heverlee, Belgium. Currently he is an imec fellow. He is part-time full professor at the EE department of the K.U.Leuven. In 1986 he received the Young Scientist Award from the Marconi International Fellowship Council. He has been associate editor for several IEEE and ACM journals, like Trans. on VLSI Signal Processing, Trans. on Multi-media, and ACM TODAES. He was the program chair of several conferences including ISSS’97 and SIPS’01. He has been elected an IEEE fellow in 2005.
Francky Catthoor, fellow at imec
7 fellows & 7 thoughts about Moore’s Law – ‘Moore’s Law is primarily an economic law, but given some expansion it can also be applied to thin-film electronics’
Most people know Moore’s Law as ‘the number of transistors on a chip doubles every two years’. That interpretation was the consequence of economic considerations. Moore predicted that ‘the number of transistors on a chip will rise...
7 fellows & 7 thoughts about Moore’s Law – ‘Ten years from now, CMOS will seem as old-fashioned as vacuum tubes’
I’m very optimistic about the continuation of Moore’s Law. But in saying that, I’m speaking about Moore’s Law purely as an economic law. I believe we’ll be able to offer increasing amounts of functionality at lower and...
7 fellows & 7 thoughts about Moore’s Law – “The Internet of Power also benefits from Moore’s Law”
It may sound strange, but striving to achieve smaller dimensions with Moore’s Law is an important enabler for producing increasingly better solar cells, with a more elaborate technology toolbox (including ALD, epitaxy, etc.). Improved process steps are...
7 fellows & 7 thoughts about Moore’s Law – “We must teach chips to feel pain”
When I was a doctorate student in the 1980s there was lots of wild speculation about Moore’s Law: give it another 10 years and transistors will stop getting smaller, they were saying back then. But in the...
7 fellows & 7 thoughts about Moore’s Law – “Wearable sensors also benefit from scaling according to Moore’s Law”
My particular area of research has nothing to do directly with Moore’s Law and advanced chip technologies. We currently use 180-nanometer technology for our health sensors. So, at first sight, you could say that in technology terms,...
7 fellows & 7 thoughts about Moore’s Law – “Moore’s Law will continue for a long time yet, but we will have to scale in a more ‘specialized’ way”
Moore’s Law is not a law of dimensions, but of economics. The law states that electronic systems will become increasingly smaller and increasingly cheaper and/or acquire more functions. The best example of this is our smartphone. In...
IMEC e iMinds: report finale del progetto CoPlaSM
IMEC, iMinds e i loro partner dell’iMinds ICON-project CoPlaSM hanno presentato, nel corso della European Utility Week tenutasi dal 4 al 6 novembre scorsi ad Amsterdam, i risultati del progetto biennale (avviato nel gennaio 2013) per realizzare e convalidare...
Imec e Omron: vibrazioni in energia elettrica
La collaborazione tra Imec e Omron ha generato un chip per raccolta di energia vibrazionale, in grado di alimentare i sensori in luoghi difficili da raggiungere. Il prototipo pesa solo 15,4 grammi per fornire corrente continua ai...
Un’elettronica sempre più “flessibile”
Fino ad alcuni anni fa l’impiego dei circuiti stampati flessibili era ristretto ad applicazioni piuttosto limitate, ma ora ci si sta rendendo conto che in talune applicazioni possono essere estremamente utili vantaggi quali il peso ridotto, l’adattabilità...
Imec dà il via al progetto europeo Terasel
Imec e e i partner di progetto hanno lanciato Terasel, un progetto europeo con l’obiettivo di sviluppare sensori e circuiti da utilizzare a livello industriale, su larga scala e con costi sostenibili. Nell’ambito del progetto Terasel sarà...